Abrasion-resistant ceramics are the main materials for corrosion and abrasion resistance. Abrasion-resistant ceramics have become one of the most widely used applications due to their high abrasion resistance, high hardness, oxidation resistance, good corrosion resistance, and extremely high and low temperature resistance. A wide range of wear-resistant materials. Some people will lose the ceramic elbow when they are used. So why is the wear-resistant ceramic elbow falling off?

1. Wear-resistant ceramics must be clear about the working temperature before construction, and different temperatures must be selected) Ceramic structures with different temperature resistance properties, otherwise the wear-resistant ceramic elbow will easily fall as the temperature rises phenomenon.

2. The wear ratio of the wear-resistant ceramic is wrong, and the ratio of different rubbers is standard, or the wear-resistant ceramic may not be evenly spread, so it is easy to cause non-stick or too little glue to easily fall and wear. After the ceramic construction is completed, it is necessary to take a rubber hammer to compact it, and then the construction surface must be kept flat.

3. The equipment is severely worn, especially the elbow part is worn through in less than one year. It has been found through practice that steel is more active at high temperatures and is more prone to wear than normal or low temperature, so some elbows have become weak links. , And the equipment is generally on a high-altitude support, maintenance is very inconvenient, so the wear-resistant ceramic elbow will fall off.

The above is the reason why the wear-resistant ceramic elbow falls off. Therefore, the wear-resistant ceramic elbow is easy to fall off during use. It needs good adhesive quality. Choose a big brand. During the equipment's wear-resistant service life, ceramic shedding will never occur. of.